LM3915 Dot/Bar Display IC
₹45.00
4 in stock
- Features
- 3 dB/step, 30 dB range
- Drives LEDs, LCDs, or vacuum fluorescents
- Bar or dot display mode externally selectable by user
- Expandable to displays of 90 dB
- Internal voltage reference from 1.2V to 12V
- Operates with single supply of 3V to 25V
- Inputs operate down to ground
- Output current programmable from 1 mA to 30 mA
- Input withstands ±35V without damage or false outputs
- Outputs are current regulated, open collectors
- Directly drives TTL or CMOS
- The internal 10-step divider is floating and can be
referenced to a wide range of voltages
| Weight | 0.01 kg |
|---|---|
| Dimensions | 1 × 2 × 2 cm |
Related products
-
4558 Dual General-Purpose Operational Amplifier
₹5.00Add to basketFeatures • Continuous Short-Circuit Protection • Wide Common-Mode and Differential Voltage Ranges • No Frequency Compensation Required • Low Power Consumption • No Latch-Up • Unity-Gain Bandwidth: 3 MHz Typ • Gain and Phase Match Between Amplifiers • Low Noise: 8 nV/√Hz Typ at 1 kHz
-
CD4440 Audio Amplifier IC
₹40.00Add to basketFeatures • Built-in 2 channels (dual) enabling use in stereo and bridge amplifier applications. Dual : 6W×2 (typ.) Bridge : 19W (typ.) • Minimum number of external parts required. • Small pop noise at the time of power supply ON/OFF and good starting balance. • Good ripple rejection : 46dB (typ.) • Good channel separation. …
-
KA3525 PWM IC
₹20.00Add to basketFeatures • 8.0 V to 35 V Operation • 5.1 V 1.0% Trimmed Reference • 100 Hz to 400 kHz Oscillator Range • Separate Oscillator Sync Pin • Adjustable Deadtime Control • Input Under voltage Lockout • Latching PWM to Prevent Multiple Pulses • Pulse−by−Pulse Shutdown • Dual Source/Sink Outputs: 400 mA Peak • …
Reviews
There are no reviews yet.