To make your DIY audio system project, we will provide you all range of required components

Store

Showing 161–180 of 198 results

  • Features 100K Internal Resistance L type PCB Mounting D type metal shaft

    Add to basket
  • Features 100K Internal Resistance Straight type PCB Mounting D type metal shaft

    Add to basket
  • Features 50K Internal Resistance L type PCB Mounting D type metal shaft

    Add to basket
  • Features 50K Internal Resistance Staight type PCB Mounting D type metal shaft

    Add to basket
  • N-Channel Power MOSFET Continuous Drain Current (ID) is 110A when VGS is 10V Minimum Gate threshold voltage 2V Drain to Source Breakdown Voltage: 55V Low On-Resistance of 8.0mΩ Gate-Source Voltage is (VGS) is ±20V Rise time is 101ns It is commonly used with Power Switching circuits Available in To-220 package

    Add to basket
  • Small signal N-Channel MOSFET Continuous Drain Current (ID) is 49A at 25°C Pulsed Drain Current (ID-peak) is 160A Minimum Gate threshold voltage (VGS-th) is 2V Maximum Gate threshold voltage (VGS-th) is 4V Gate-Source Voltage is (VGS) is ±20V (max) Maximum Drain-Source Voltage (VDS) is 55V Rise time and fall time is about 60ns and 45ns …

    IRFZ44NRead More

    Read more
  • Features • 8.0 V to 35 V Operation • 5.1 V  1.0% Trimmed Reference • 100 Hz to 400 kHz Oscillator Range • Separate Oscillator Sync Pin • Adjustable Deadtime Control • Input Under voltage Lockout • Latching PWM to Prevent Multiple Pulses • Pulse−by−Pulse Shutdown • Dual Source/Sink Outputs: 400 mA Peak • …

    KA3525 PWM ICRead More

    Add to basket
  • Features: Adjustable 3-terminal positive voltage regulator Output voltage can be set to range from 1.25V to 37V Output current is 1.5A Maximum Input to output voltage difference is 40V, recommended 15V Maximum output current when voltage difference is 15V is 2.2A Operating junction temperature is 125°C Available in To-220

    Add to basket
  • Features 1• Internally Frequency Compensated for Unity Gain • Large DC Voltage Gain 100 dB • Wide Bandwidth (Unity Gain) 1 MHz (Temperature Compensated) • Wide Power Supply Range: – Single Supply 3 V to 32 V – or Dual Supplies ±1.5 V to ±16 V • Very Low Supply Current Drain (700 μA) —Essentially …

    LM324 OP AMP ICRead More

    Add to basket
  • Features 3 dB/step, 30 dB range Drives LEDs, LCDs, or vacuum fluorescents Bar or dot display mode externally selectable by user Expandable to displays of 90 dB Internal voltage reference from 1.2V to 12V Operates with single supply of 3V to 25V Inputs operate down to ground Output current programmable from 1 mA to 30 …

    LM3915 Dot/Bar Display ICRead More

    Add to basket
  • Feature 3-Terminal Regulators. Output Voltage & Current up to 5Volt & 1.5A. Internal Thermal-Overload Protection. High Power-Dissipation Capability. Internal Short-Circuit Current Limiting. Output Transistor SAFE-Area Compensation.

    Read more
  • Feature 3-Terminal Regulators. Output Voltage & Current up to 9Volt & 1.5A. Internal Thermal-Overload Protection. High Power-Dissipation Capability. Internal Short-Circuit Current Limiting. Output Transistor SAFE-Area Compensation.

    Add to basket
  • Feature 3-Terminal Regulators. Output Voltage & Current up to 12Volt & 1.5A. Internal Thermal-Overload Protection. High Power-Dissipation Capability. Internal Short-Circuit Current Limiting. Output Transistor SAFE-Area Compensation.

    Add to basket
  • Feature 3-Terminal Regulators. Output Voltage & Current up to 15Volt & 1.5A. Internal Thermal-Overload Protection. High Power-Dissipation Capability. Internal Short-Circuit Current Limiting. Output Transistor SAFE-Area Compensation.

    Add to basket
  • Feature 3-Terminal Regulators. Output Voltage & Current up to -12Volt & 1.5A. Internal Thermal-Overload Protection. High Power-Dissipation Capability. Internal Short-Circuit Current Limiting. Output Transistor SAFE-Area Compensation.

    Read more
  • Feature 3-Terminal Regulators. Output Voltage & Current up to -15Volt & 1.5A. Internal Thermal-Overload Protection. High Power-Dissipation Capability. Internal Short-Circuit Current Limiting. Output Transistor SAFE-Area Compensation.

    Add to basket
  • Features Dual Schottky Diode. Common Cathode Type. Forward Current: 20A for dual diode at 50% duty cycle. Forward Voltage drop: 0.9V (per leg) Peak Reverse Voltage: 100V. Reverse Current: 6mA. Rate of charge (dv/dt): 10k V/us. Available in To-220 Package.

    Add to basket
  • Type – NPN Collector-Emitter Voltage: 300 V Collector-Base Voltage: 300 V Emitter-Base Voltage: 5 V Collector Current: 0.5 A Collector Dissipation – 20 W DC Current Gain (hfe) – 30 to 240 Operating and Storage Junction Temperature Range -65 to +150 °C Package – TO-126

    Read more
  • Type – PNP Collector-Emitter Voltage: 300 V Collector-Base Voltage: 300 V Emitter-Base Voltage: 5 V Collector Current: 0.5 A Collector Dissipation – 20 W DC Current Gain (hfe) – 30 to 240 Operating and Storage Junction Temperature Range -65 to +150 °C Package – TO-126

    Read more
  • Features • Small-Signal Bandwidth: 10 MHz • Output Drive Capability: 600 , 10 VRMS • Input Noise Voltage: 5.0 nV Hz (Typical) • DC Voltage Gain: 50000 • AC Voltage Gain: 2200 at 10 kHz • Power Bandwidth: 140 kHz • Slew Rate: 9.0 V/s • Large Supply Voltage Range: 3.0 to 20 V • …

    NE 5532 OP AMP ICRead More

    Add to basket